Rubber
Hybrid.
RUBBER WATERPROOFING AND COATING
Description
AquaGO® RUBBER HYBRID is a high build, high solids waterproofing with extreme elongation for interior and exterior use.
It provides a highly elastic waterproof coating with excellent weather resistance. AquaGO® RUBBER HYRBID has long life elongation and is ideally suitable for use in areas with extreme climatic conditions.
It is applied by brush or spray and after drying can be walked upon uncovered. AquaGO® RUBBER HYBRID is designed for application on roofs constructed from a wide variety of materials, i.e. concrete, light weight concrete, roof tiles, wood, galvanized steel, asphalt and asbestos cement.
Benefits
Durable
UV stable
Ready to use
Quick drying
Surface tolerant
Flexible, superb elongation
Contains no toxic solvents
Impermeable to moisture
Excellent mechanical properties
Usage
Parapets
Tile ridging
Plaster surfaces
Roof flashings
Galvanized roofs
Concrete surfaces
Cement roof tiles
Gutters and downpipes
Substitute for “torch-on”
Application
AquaGO® RUBBER HYBRID can be applied by brush or spray.
Embed fibre membrane in areas which require reinforcement.
AquaGO® RUBBER HYBRID is more effective to apply at a rate of 0.5-0.7L/m2 until a total dry film thickness of 2mm is achieved.
Do not apply if rain is threatening, as AquaGO® RUBBER HYBRID is not resistant to rain until fully dry. Clean tools and equipment immediately after use with clean water.
Surface Prep
PREP FOR STEEL & GALVANISED SURFACES
Sand down with abrasive sandpaper and ensure that the surface is free from any rust, oxidization, dust, dirt, or any foreign debris.
Apply three coats of AquaGO® RUBBER HYBRID allowing 3 hours drying time between coats.
PREP FOR CEMENTITIOUS SURFACES & BRICKS
Remove all dust, dirt or any foreign debris.
Ensure that the surface is dry. Apply one entire coat AquaGO® RUBBER HYBRID and leave for 6 hours to cure.
Apply three coats AquaGO® RUBBER HYBRID allowing for 3 hours drying time between coats.
For more info
Please contact us for further information.
The information given in this Technical Data Bulletin is based upon laboratory research, as well as extensive field work and application.
This information is based on AquaGO®’s present state of knowledge and is intended to provide general information on AquaGO®’s products and their methods of use.
The prospective user is recommended to determine the suitability of AquaGO®’s suggestions and products before adopting them on a commercial scale.