A SMOOTH HYDROPHOBIC CEMENTITIOUS SKIM-COAT
AquaGO® CEM-SKIM is a superior quality high performance, hydrophobic cement based skim finish.
AquaGO® CEM-SKIM is formulated for the finishing of surfaces such as interior & exterior plaster surfaces, precast and fair faced concrete walls and ceilings prior to painting.
It is intended to provide a smooth fine surface to pre-levelled plaster surfaces and ceilings as a base for final painting and wall finishes and can also be applied to a moist surface.
Hydrophobic (water repellent)
Contains no toxic solvents
Will not peel, flake or blister
Can be used as caulking
No primer necessary
Use as a crack filler
Pre-levelled plaster surfaces
Pre-levelled concrete surfaces
Water features and dams
Can be used in place of Cretestone
Wet the surface with an industrial splatter brush or spray fine mist.
Apply a liberal amount AquaGO® CEM-SKIM to the surface. By means of a plaster trowel and by semi-circular movements, displace the paste to obtain a consistent even surface.
Finish off with a rubber faced float to achieve a smooth texture. The product should be kept hydrated when applied in direct sunlight. After full cure, slightly abrade imperfections with fine sandpaper.
Add small quantities of potable water to the dry ingredients while agitating continually with a flat paddle or mechanical means to achieve a homogenous thick paste.
Please contact us for further information.
The information given in this Technical Data Bulletin is based upon laboratory research, as well as extensive field work and application.
This information is based on AquaGO®’s present state of knowledge and is intended to provide general information on AquaGO®’s products and their methods of use.
The prospective user is recommended to determine the suitability of AquaGO®’s suggestions and products before adopting them on a commercial scale.
For more info, download the data sheet or contact us directly.
firstname.lastname@example.org or call Suzette: +27 76 059 5142